Coil Pack

[paulc]

Not sure what I am doing wrong, but how do you pull the leads off the ignition coil?? Many thanks for any help.

[Sudesh]

Hi Paul,

There is a small tab on the back of the 2p connector that you need to press in, once is pressed you can pull the connector from the coil.

HAve a look here, it will help

http://www.danoland.com/nsxgarage/spark_plugs/spark_plug.htm

[paulc]

Sudesh you are a gent, many thanks, it worked first time.

[Sudesh]

Sudesh you are a gent, many thanks, it worked first time.

Not a bother! Make sure to check rear bank bor corrosion.

[paulc]

Will do, front bank are all good.

[Sudesh]

Will do, front bank are all good.

Fronts usually are, is the rears that take the beating lol

[paulc]

Rear right is grotty, but the other 2 are looking good.

[WhyOne?]

Rear right is grotty, but the other 2 are looking good.

If you need a replacement or two, I have some used (but good nick/fully working) ignition coils kicking about you can have for a few £'s....

[A.S. Motorsport]

Keep in mind there are two styles a 3 wire OBD-II and a 2 wire OBD-1

[paulc]

Many thanks, got the front one from Dirk because the "stem" had started to disintegrate, the rear one I have cleaned up and put back in, car is running lovely.