Side repeaters replacement - what type?

[exiges1]

I noticed at Silverstone that some owners had replaced the orange side repeaters with clear ones.

I think another member told me that the NSX orange ones has been replaced with Civic ones? I would like to change mine but a quick look on ebay highlighted many different Civic types and shapes.

What year (and if necessary model) Civic should I be looking to source the clear repeaters from?
Thanks for any information.

Tony.

[NSXGB]

They are the same as the S2000. You can buy clear or smoked grey alternatives.

Edit.

Part Numbers as follows for clear S2000 side repeaters (not sure what year the S2000 had the smoke lenses).

33801-S2A-J02
33851-S2A-J02

£18.11 each inc. VAT from your Honda dealership.

[exiges1]

Great, many thanks for the info.

[b1gbrad]

I spliced the original S2000 bulb holder and wiring in too, sourced from S2KVGS on ebay for a couple of quid - it saved me modifying the lenses to accomodate the NSX bulb holder.

[Dragonlady]

The whole unit should just be a straight swap, no cutting needed. Ours was.

Ian

[Kaz-kzukNA1]

Strictly speaking, the bulb holder/socket is different between NSX and S2000.
However, the one on NSX is like soft rubber/silicone material so it could be bit tight while locking it into position but if you press it hard, it will fit so can be done without any modifications apart from changing the bulb colour if the local regulation requires it to be in orange.

Kaz

[exiges1]

Thanks all for the information and advice.

[nigel]

In pursuit of the consumate UK / USDM car, any chance someone would have the exact measurements, from a known common point, so I could purchase some S2000 lights with clear lenses and create mounting holes now I have the p/n?

Cheers
nigel

[NSXGB]

I have a spare front wing sitting in my garage, I'll take a photo & measure up for you.





In pursuit of the consumate UK / USDM car, any chance someone would have the exact measurements, from a known common point, so I could purchase some S2000 lights with clear lenses and create mounting holes now I have the p/n?

Cheers
nigel

[britlude]

here's pix that i took for a similar request.....

draw a horizontal line 14.5" up from the bottom of the wing, draw a vertical line 3 inches from the back edge of the wing... where they cross is the centre of the side marker indicator....

http://i301.photobucket.com/albums/nn41/thisYup/general%20stuff/2014-06-09-5026.jpg (http://s301.photobucket.com/user/thisYup/media/general%20stuff/2014-06-09-5026.jpg.html)


http://i301.photobucket.com/albums/nn41/thisYup/general%20stuff/2014-06-09-5025.jpg (http://s301.photobucket.com/user/thisYup/media/general%20stuff/2014-06-09-5025.jpg.html)


http://i301.photobucket.com/albums/nn41/thisYup/general%20stuff/2014-06-09-5024.jpg (http://s301.photobucket.com/user/thisYup/media/general%20stuff/2014-06-09-5024.jpg.html)


hope that helps

[britlude]

http://i301.photobucket.com/albums/nn41/thisYup/general%20stuff/2014-06-07-5011Small.jpg (http://s301.photobucket.com/user/thisYup/media/general%20stuff/2014-06-07-5011Small.jpg.html)


http://i301.photobucket.com/albums/nn41/thisYup/general%20stuff/2014-06-07-5010Small.jpg (http://s301.photobucket.com/user/thisYup/media/general%20stuff/2014-06-07-5010Small.jpg.html)


and the S2000 cutout....

http://www.s2ki.com/s2000/topic/269139-sidemarker-pattern/%2006/07/2014

http://roger1234.com.sapo.pt/side0.jpg

not sure what the extra top right is for! and not sure if it stays on top for both sides of the car!

just to add... all these pics have the front of the car to the left (front wheel in some of the pics!)

[sorepaws]

that's a flash measuring thingummyboben !

[nigel]

It doesn't get much better than that !!
I think even I can place them with these measurements.
I'll be ordering my new covers and placing holes in my USDM wings ASAP.

Thanks loads lads.

Cheers
nigel