darock
24-01-2015, 11:33 AM
Hello :)
I want to build a pressure bleeding tool for the brake system. My car hibernates quite far away from me so I have no possibility to measure it myself.
can someone give me measurements of outside, inside diameter of the fluid reservoir and overall height of the master cylinder with reservoir without cap?
the plan is to use about 1bar of pressures air to push the fluid through the system. I used to do that DIY with an old tire hose strapped to the reservoir but the NSX deserves better :D
If that works out, I could make more of those adapters if someone is interested.
cheers
Bernhard
I want to build a pressure bleeding tool for the brake system. My car hibernates quite far away from me so I have no possibility to measure it myself.
can someone give me measurements of outside, inside diameter of the fluid reservoir and overall height of the master cylinder with reservoir without cap?
the plan is to use about 1bar of pressures air to push the fluid through the system. I used to do that DIY with an old tire hose strapped to the reservoir but the NSX deserves better :D
If that works out, I could make more of those adapters if someone is interested.
cheers
Bernhard