91-037 Service Bulletin

[Bob Holmes]

I have found a service bulletin, it recommending the use of a frame to aid removing the engine, would anyone have a drawing with dimensions or a frame I could purchase.
Thanks for reading.

[NSXGB]

If you have a look on NSX Prime, I'm pretty sure this was discussed not long ago. There was a chap who had made a frame up and possibly had some drawings....

[NSXGB]

http://www.nsxprime.com/forum/showthread.php/188047-Engine-cradle-for-pulling?highlight=Engine+cradle

[Gary]

Dali Racing sell/sold such a cradle in steel.

http://daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2099

I'd be happy to weld up something similar if supplied with the necessary dimensions.

Gary

[NSXGB]

Dali Racing sell/sold such a cradle in steel.

http://daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2099

I'd be happy to weld up something similar if supplied with the necessary dimensions.

Gary

Thats pretty neat.

Another discussion in Prime: http://www.nsxprime.com/forum/showthread.php/168671-Homemade-Engine-Trans-Removal-Cradle?p=1848193#post1848193

[Bob Holmes]

Thanks for the links, I will have a look at them all now I have my PC back together.