How to remove drivers seat?

[Philip]

Hi guys, I need to remove my drivers seat to take it to a trim shop. I had a quick look under the seat but it looks complicated. Anyone on here know how to get the seat out of the car, care to describe how please?

Many thanks,

Phil

[goldnsx]

Quite easy task, just take care not to scratch anything.

- adjust the steering wheel all the way up and in
- take the armrest out (gain space)
- move the seat all the way to the front
- remove two plastic caps and remove two screw of the rear seat rails
- move the seat all the way to the rear and remove two screw of the front seat rails (under the carpet)
- now wiggle the seat a little bit and angle it a little bit to disconnect the 12V wire between the seat and the floor (the most complicated step)
- remove the lower side covers (fuel tank filler activator), cover the doors steps
- lift the seat a little bit to remove the lower seat belt screw. If not you can take seat out with the belt still attached.
- to take it out the seat has to be all to the rear and the back/head area all to the front (EDIT: can only be made with the wire still attached).

Hope this helps.

[Philip]

That’s a great help. Than’ you very much. ��