Drive Shaft Oil Seal

[mutley]

HI All,

can anyone confirm the part numbers for the drive shaft oils seals (where the shaft goes into the gear box), and if left and right sides are the same number.

I have looked on diagrams and it's difficult to tell.

The part number I have found so far is : 91207-PR8-005.

Cheers
Jim

[Kaz-kzukNA1]

https://lh3.googleusercontent.com/pw/AM-JKLVj-X71f-sk85GJ8VYatjBx_jJbxI1tMCQ6EXHMNW6Vk3-_ZMgSijOq1U0Y-Ur48MezjbbKfjkWqyGcZHnTia9Hh8JabB4qZ8OPfN0d_lGKKBQ k5QWqOgmDr7uIEER68A5nVi7r3TzfilyAw5XR73HTwA=w800-h600-no?authuser=0

https://lh3.googleusercontent.com/pw/AM-JKLWDRGrorGOiHl_hue_NyQGBcfNCtltXTD24YlRlu1jprfy1i waS3mAKqOsWUp5q9vx31E50v_pa9Zaxog-S8EK1iqItwIgvS3JLIXU_IQrSv3RARBX64YlTwZI4oOZnCIFg6 pegSFMEI17zMN0sY6gBKg=w800-h600-no?authuser=0
Hi, Jim.

For the Left side, 91207-PR8-005 where the L-dirveshaft inboard joint goes into the DF central gear inside the trans case.


For the Right one, unless you are removing the trans case or the intermediate shaft, can’t replace the seal.

No need replacing it if doing just the R-side driveshaft service.

R-driveshaft inboard joint connects to one side of the intermediate shaft and the other end of the int shaft goes into the DF planetary carrier through the CL case.

For your reference, 91206-PR8-005 is the one sitting on the CL case and different from the trans case one.


Kaz

[mutley]

Hi Kaz,

I'm not sure if I need them, but just thought as I am renewing all those parts I may as well renew the seals too.
Thanks again for your insight, hope to catch up at some time this year .

Cheers
Jim