View Full Version : Don't suppose anyone has spare radiator....
gsuds
23-02-2007, 11:07 AM
Well, the bottom tank of rad is split right across, would certainly explain nature of leak.
Obviously, not repairable :mad:
Going to try breakers first. Anyone got any good ideas before I give local dealer a call? :shock:
Graham
Senninha
23-02-2007, 12:48 PM
www.autolinemotors.co.uk (http://www.autolinemotors.co.uk)
These guys are breaking an NSX at the moment. Minch is looking at the interior so maybe you could group together on the parts?
HTH
gsuds
23-02-2007, 01:57 PM
Thanks Paul, have sent them an email.
Parts Gateway has pulled out an outfit in London called Xcess Access, who have an NSX rad with 6 months warranty, for £220. May well just take that.
G
gsuds
23-02-2007, 03:00 PM
Paul,
Your tip-off has come up trumps - rad "perfect" for £100+vat.
This is what the forum's all about!
Owe you one.
G
CrazyMixedUpKid
23-02-2007, 06:02 PM
if you didn't have one before - I recommend a radiator shield ...
Got mine from Dali but SoS do them too.
http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=49
http://www.scienceofspeed.com/products/exterior_performance_products/NSX/Cantrell_Concepts/radiator_shield/
Cheap insurance!
gsuds
24-02-2007, 09:20 AM
Thanks mate - might just - but see Dan's reservations on another thread
G
Chris B N
26-02-2009, 05:47 PM
there's one on ebay but dosn't look good in the picture its' got 22 to run.
good luck with the search
britlude
26-02-2009, 08:26 PM
http://cgi.ebay.co.uk/HONDA-NSX-RADIATOR_W0QQitemZ290297312528QQcmdZViewItemQQptZU K_CarsParts_Vehicles_CarParts_SM?hash=item29029731 2528&_trksid=p3286.c0.m14&_trkparms=72%3A1229%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318
NSXGB
26-02-2009, 09:41 PM
If you have a Serck Marston outlet near you, I had them build me a rad for a kit car a few years ago for £170.
Another option for you...
http://www.serckintertruck.co.uk/
The one on ebay has been on there quite a while and the seller may be up for a deal...
nigel
28-02-2009, 07:22 PM
The screen that Chris has at S.o.S. is a nice bit of kit. Simple but it does the job.
You can get the same screen at a DIY store and cut it yourself if you want but for $40 U.S. you should go ahead.
Cheers
nigel
Hagasan
28-02-2009, 08:12 PM
...all helpful advice but the post is two years old.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.