clutch peddle prob

[amo]

ok drove the car to town and the peddle was slowly sticking halfway

then it dies not sticky at all but no clutch and cant change gear

so looked and found no fluid in resivour got the rac man out nice bloke and slave cilinder is leaking

ok so i have another 1 lucky me

slave cilinder located front of gearbox bottom near fuel tank

12mm socket - bolts on slave cilinder to gearbox
8mm spanner - bleed valve
10mm spanner - break pipe
extention bar

jack car up
place axel stand under car
take off rear passinger wheel
take off the wheel arch

get ur self under the car
use 10mm spanner take off break pipe
use 12mm socket might need extention bar as well undo 2 bolts that hold the slave cilinder on the the gearbox the bolts are tucked up at the top of the cilinder its a total pain to tale off but u can do it
pull out slave cilinder
repalce with new 1 and retighten everything up
now all u need to do is bleed the thing

better to have 2 ppl to do this
need to do it tomorrow for me lol
any 1 want to add to this help urself

thx amo

[AR]

You need a hand in the AM? If so PM and I can drop by.

Cheers,

AR

[dan the man]

my clutch was very sticky at the bottom till i bled the slave cylinder.

cheers for the write up amo.

[AR]

Will be there around 10:00 AM mate.

[amo]

sweet ur a nice man
thx amo