Paint spraying nsx

[Mark N]

Does anyone know what the difference is in paint spraying proceedures between aluminium and conventional steel cars as i need to have a wing sprayed for stone chips.

[NSX 2000]

Does anyone know what the difference is in paint spraying proceedures between aluminium and conventional steel cars as i need to have a wing sprayed for stone chips.

If you need some body to do this work I would recommend Altered Image Coachworks in Strood Kent, 01634 721011 ask for Peter.

HTH

Paul.

[Senninha]

Or try 355 at Dunsfold (next to Top Gear) ...

Welcome to the NSXCB by the way .. :beer:

[vtecdirect]

spraying onto aluminium requires the use of etch primer usually. The paint is still the same as normal.

[NSXGB]

I see you are in Kent. Charcott Garage near Bough Beech comes highly recommended. They do a lot of high value classic cars.
I will be using them when I get round to getting my bonnet fitted.

[Mark N]

Thanks for all your help:thumbsup: I will try 355 first as im in Dunsford on friday.

[forumadmin]

Well unless you take the wing back to the metal your not spraying onto ali right? Just old paint.

You wouldn't want to go to the metal anyway, as I don't think anyone is going to coat the metal in the same primers that Honda used.

[markc]

spraying onto aluminium requires the use of etch primer usually. The paint is still the same as normal.

I though steel, or any bare metal, required required etch primer?