PDA

View Full Version : Paint spraying nsx



Mark N
26-08-2009, 04:30 PM
Does anyone know what the difference is in paint spraying proceedures between aluminium and conventional steel cars as i need to have a wing sprayed for stone chips.

NSX 2000
26-08-2009, 05:30 PM
Does anyone know what the difference is in paint spraying proceedures between aluminium and conventional steel cars as i need to have a wing sprayed for stone chips.

If you need some body to do this work I would recommend Altered Image Coachworks in Strood Kent, 01634 721011 ask for Peter.

HTH

Paul.

Senninha
26-08-2009, 06:21 PM
Or try 355 at Dunsfold (next to Top Gear) ...

Welcome to the NSXCB by the way .. :beer:

vtecdirect
26-08-2009, 08:05 PM
spraying onto aluminium requires the use of etch primer usually. The paint is still the same as normal.

NSXGB
26-08-2009, 08:23 PM
I see you are in Kent. Charcott Garage near Bough Beech comes highly recommended. They do a lot of high value classic cars.
I will be using them when I get round to getting my bonnet fitted.

Mark N
26-08-2009, 09:03 PM
Thanks for all your help:thumbsup: I will try 355 first as im in Dunsford on friday.

forumadmin
26-08-2009, 09:42 PM
Well unless you take the wing back to the metal your not spraying onto ali right? Just old paint.

You wouldn't want to go to the metal anyway, as I don't think anyone is going to coat the metal in the same primers that Honda used.

markc
26-08-2009, 09:46 PM
spraying onto aluminium requires the use of etch primer usually. The paint is still the same as normal.

I though steel, or any bare metal, required required etch primer?