Part number?

[Dragonlady]

Hi, does anybody know the part numbers for the small covers and fasteners that hold the high level rear brake light bar to the spoiler?

Thanks Sharon

[AR]

How many you need I am sure I got a couple somewhere.

[NSXGB]

Cap in Sebring silver NH552M = 71703-SL0-003ZF
Nut (speed nut) = 90303-SA5-003
Self tapping screw (No.4 x 16) = 93903-444G0


Probably best to get the self tappers and speed nuts from elsewhere, will save some money.

Cap is number 7 in picture.

6310

They're about $6 each in the States....I'd be interested to know how much more it is over here...probably nearer £20!

[Sudesh]

71703-SL0-003ZF : Cap,rr.sp*NH552M* : £7.89
90303-SA5-003 : Nut front combi : £2.06
93903-444G0 : Screw.tap 4x16 : £0.62

[Dragonlady]

Thanks guys. Went into our local Honda dealership last thing today, they said these parts are on back order, won't be in till December.
Will probably order them on Friday. Need to order four of each I think, we only have one in the center holding the light in place.
Ian will take the middle one out on Friday to see how this speed nut is attached and if we need four of them.

Sharon

[NSXGB]

The speed nut clips onto the rear light, the rear light is pushed into the spoiler then the screws go upwards through the hole in the bottom of the spoiler and into the speed nut. You are right, there are 5 of each required in total.
You can save yourself about a tenner getting the speed nuts and screws from a DIY shop or motor factor by the looks of it.