Best window regulator thread

[Metabro]

for all who don't already know

http://www.nsxprime.com/forums/showthread.php?t=135277


Watch the Window DIY Kit movie: http://www.youtube.com/watch?v=SSzUMkjHv5w
or download the PDF version: http://www.nsxprime.com/forums/attac...8&d=1276468995

[Greybloke]

Ohhhh Think I need 2 of these!
Thanks Metabro

[Sudesh]

Yeah great thread! I'm already getting this done and might order some additional kits.

[nobby]

NICE ONE BUD! :)

u know it makes sense! ;)


Yeah great thread! I'm already getting this done and might order some additional kits.

[Greybloke]

Fitted mine over the weekend, great improvement and only skinned three of my knuckles....

[Sudesh]

I installed mine also and think its a really neat setup. Only problem I had was with the spring, took me a while to get the thing to wind round again, but eventually sorted that. Also while I was in that far I cleaned up the rails and re-greased everything using the Honda Urea Grease. The centre spline on my motors were ok, but again being in that far I added the metal adapter from the kit anyway as they are bound to wear at some point. Also On my car I have the updated window regulators, but I also decided to install the dali window fixit with them as added protection.


Something I would suggest to owners is, if your window does pop and fall into the the frame at some point, what ever you do, DO NOT PRESS THE BUTTON TO TRY AND RAISE IT AGAIN

While working on Andrews car, I had a another return customer in with regulator fail, the little white common failure joint, had snapped and window fell, but the metal cable had been chewed up by the motor as someone must have tried a few time to raise the window by pressing the button. There was no option other than to replace the regulator with a new item.

Luck for the owner that while the car was here I inspected the the other regulator joint which was showing signs of cracking and splitting and would not have been long till it failed. I replaced that with the Dali Fixit also.