PDA

View Full Version : NSX-R Door Lock Blanks


Sudesh
10-03-2011, 02:44 PM
Well just got these installed. Nothing overly major or complicated, for me a 10min job.

So these are the tiny NSX-R parts. As always not cheap for what you get lol You can see the finish is the same as the door handle surround.

http://i77.photobucket.com/albums/j77/icongroup/NSX8/SAM_3727.jpg
http://i77.photobucket.com/albums/j77/icongroup/NSX8/SAM_3728.jpg
http://i77.photobucket.com/albums/j77/icongroup/NSX8/SAM_3729.jpg
Sudesh
10-03-2011, 02:46 PM
For those unsure what they are, they basically fill in the door lock switch, NSX-R does not have auto lock

http://i77.photobucket.com/albums/j77/icongroup/NSX8/SAM_3731.jpg
http://i77.photobucket.com/albums/j77/icongroup/NSX8/SAM_3732.jpg
http://i77.photobucket.com/albums/j77/icongroup/NSX8/SAM_3733.jpg
Sudesh
10-03-2011, 02:47 PM
Fully installed

http://i77.photobucket.com/albums/j77/icongroup/NSX8/SAM_3735.jpg
http://i77.photobucket.com/albums/j77/icongroup/NSX8/SAM_3736.jpg
PeteM
10-03-2011, 04:52 PM
So these are the tiny NSX-R parts. As always not cheap for what you get lol "] ("http://i77.photobucket.com/albums/j77/icongroup/NSX8/SAM_3729.jpg[/IMG)

So go on then, how much ?
Sudesh
10-03-2011, 05:04 PM
So go on then, how much ?

Take a guess lol what do you think these two very small bits of non functioning plastic cost.
Senninha
10-03-2011, 06:17 PM
ANy chance they were but one get one free ...... LoL
nobby
10-03-2011, 07:24 PM
i reckon around 25-30 quid depending on where sourced that is
Sudesh
10-03-2011, 07:26 PM
i reckon around 25-30 quid depending on where sourced that is

If thats "EACH" your quoting your not far wrong!
nobby
10-03-2011, 07:33 PM
yes i meant each! :)

i was not expecting them to be packed as a pair!

Crazy, crazy prices!


If thats "EACH" your quoting your not far wrong!
Sudesh
10-03-2011, 08:08 PM
yes i meant each! :)

i was not expecting them to be packed as a pair!

Crazy, crazy prices!

It is when you consider the actual auto door lock button that does something is £63.12 each!
NSXGB
10-03-2011, 10:55 PM
Should have just scratched off the White lettering :rolleyes:
Sudesh
10-03-2011, 11:20 PM
Should have just scratched off the White lettering :rolleyes:

Possibly, but you still have a switch, different shape/orientation and movement. The NSX-R blank is what it is............Nothing lol
rsevo6
11-03-2011, 10:22 AM
These NSX plastic dummy parts are indeed rediculously expensive.
When I got my US NSX 3 years ago, I wanted to replace the US style centerconsole cointray with the EU style 4-switch panel (where the EU headlights washer /foglight switches etc are) as I wanted to put in some additional switches for a to be installed EU needed rear foglight etc.
I got me 2 OE fog switches used and ordered the switchholder panel and one switch blank new without asking prices, figured the plastics couldn't be too expensive.....:rolleyes:
The switchholder panel itself was something like 60 Euro, the switch blank about 40 Euro!!!!! 100 Euro for a few cents of plastic molded into a form...................:eek::eek:
TheSebringOne
12-03-2011, 12:27 AM
They must weigh a few ounces less = more mpg = more saved to pay for them !:D
Sudesh
12-03-2011, 02:47 PM
They must weigh a few ounces less = more mpg = more saved to pay for them !:D

lol, my scales dont even pick up the weight, infact the auto button doent show any weight either on my scales.