my aircon evaporator overhaul

[britlude]

In the continuing quest to narrow down the cause of the overnight condensation (and getting fed up with the prospect of scraping the ice off the outside and inside of the screen) I’ve moved onto the aircon evaporator.

I’ve checked/replaced the usual suspects, door membranes/door seals/frame seals, window adjustment, but to no avail! I experimented, and worked out that if I use the aircon during the day, when I go to it the next morning, the condensation is there, so it must be aircon matrix related. I’ve checked the heater drain tube wasn’t blocked, but I never get an aicon puddle under my car, never have! I’ve already sorted a cabin filter solution, but I’m guessing it’s the already accumulated crud that is giving me the issue (I hope!)

I sourced a replacement one a couple of weeks ago and this morning set to work! I started at 9.18 with what looks just like an NSX!
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111930640x480.jpg

glovebox/underguard and central armrest out.. (9.30… can you tell I might have done this bit before!)
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111931640x480.jpg

clock/vent/centre console out….(9.39!)
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111932640x480.jpg

instruments and electronics out……(10.00)
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111933640x480.jpg

[britlude]

then the main bit…..(10.27)
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111934640x480.jpg

then it was a dive under the bonnet, spare wheel and carrier out, followed by the battery and heater fan. A good 25 mins was spent persuading the heater rubber hoses to let go of the heater pipes, but with gentle easing they came off! Air con connections disconnected and the heater unit was ready to come out… (I already had the aircon professionally evacuated, to save the ozone and all that, and he was surprised at the large size of the replacement evaporator)
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111936640x480.jpg

at 12.15 the heater unit was on the floor, not bad!
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111937640x480.jpg

and a gaping hole was left in the interior
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111938640x480.jpg

[britlude]

Now this was the issue I was expecting, loads of crud stuck in the matrix,. I’d already tried to clear the mess before, but access is hardly generous!
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111939640x480.jpg

http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111941640x480.jpg

the replacement…..
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111940640x480.jpg

http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111942640x480.jpg

[britlude]

then once it was changed over and the heater unit reassembled, the car could go back together (1.18!)http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111943640x480.jpg

I packed up for the day at 3.30 (well it is Christmas!), but the heater unit, all the under bonnet stuff, and the dash were back in…
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111944640x480.jpg

then put the glove box and door back in! by then it was cold and getting a bit dull for another pic!!! So a productive day, evaporator swapped out and mostly back together! While it was all apart I also sorted out some suspect alarm wiring and routing!Also, whilst tracing a couple of odd wires i found the switch box to the honda security system, bolted onto the tray under the steering column....
http://i301.photobucket.com/albums/nn41/thisYup/nsx stuff/nsx evaporator change/z241220111950640x480.jpg

i''ve got an aftermarket alarm on the car, so no idea whether this works or not!!!

[nobby]

interesting way to spend your Christmas Eve! :)

great work ... hope the replacement evap does the business for u

[TheSebringOne]

Wow, talk about F1 pit stops being quick, I've never seen the interior stripped so quickly!

I can't believe how big the heater unit is! Good luck and hope you found the solution.

Umm, not sure its a good idea to show the Honda security system?

[britlude]

well, i'd done all the xmas wrapping, cards delivered, and my girlfriend is away with her family!!! and as it was dry and relatively mild, I got on with it! :)

i knew the security control box was there, but had no idea the switch box was fitted! and I've had the car 6 years!!! there's no mention of any of it in the manual, and internet searches show nothing! where it was fitted, i'm pretty sure you can't actually reach it without getting out of the car, and getting your head under the steering wheel!

i did wonder if it was a JDM fitted security system but it's all in english.... oh, it's kenwood too! anyone else recognise it?

i was going to leave the control box off, but i'm not sure if it fires the 5mph lockdown... when i get the car back together i'll have to check!

[britlude]

well... it's been a month since i replaced the evaporator, the weather has been wet/dry/cold/frosty/windy and i've used the aircon pretty much every time i've gone out (it'a a daily driver, so quite often)........

... it would seem the accumulated crud in the evap matrix WAS the cause of the overnight condensation, as i've not had a wet screen on the inside since!!! HURRAH, and about time!

so it your car suffers from drippy screen syndrome and you've eliminated the usual suspects, either make sure the aircon is off when the heater is on (stops the matrix having condensation on the outside of it as it dehumidifies the incoming air) or get the evap matrix cleaned! if your car is drippy screen free I suggest sorting a heater intake filter as a preventative measure!!!

:)

[TheSebringOne]

Congrats at last , problem solved!