View RSS Feed

Recent Blogs Posts

  1. Radio Head Unit - Repair I

    Introduction
    Issues with the radio head unit is a common fault, affecting nearly all NSX depending on age and climate zone. Capacitor replacement should be the first step to perform, followed by further analysis and repair.

    Diagnostic
    The following error cases and ways of repairing have been identified so far. Almost all of them are caused by capacitor leakage but not exclusively since the radios suffer from normal wear and tear similar to other consumer audio electronics. ...

    Updated 12-07-2023 at 09:15 PM by Heineken

    Categories
    Member's Blogs , Technical Information
  2. Gauge Cluster - Tester

    Introduction
    The NSX Gauge Cluster provides a large number of functions and displays, resulting in roughly 60 pins across two green connectors. Testing all of them manually is a error-prone task, requires special equipment and takes a lot of time. To speed things up, it helps to have a tester that provides all of these functions in a compact way and utilizing the original connectors.

    Requirements
    A simple user interface. Usage of the original connectors. Adaptable for multiple ...

    Updated 05-03-2022 at 07:51 PM by Heineken

    Categories
    Member's Blogs , Technical Information
  3. Gauge Cluster - Capacitor Replacement

    Introduction
    The Gauge Cluster suffers from ageing capacitors as many ECUs in the NSX do. Leaking capacitors at the gauge cluster is a serious issue. Acid near the warning indicator circuit causes shorts and even potentially lead to a fire. Same as with the other capacitor issues, a replacement should be considered before the unit fails.

    Diagnostic
    First signs are a non-accurate speed indication or a permanently lit brake light warning even though bulbs and wiring are ...

    Updated 17-12-2022 at 02:41 PM by Heineken

    Categories
    Member's Blogs , Technical Information
  4. Gauge Cluster - Bulb Replacement

    Introduction

    Around the 100.000 to 150.000 km range the first illumination and indicator bulbs in the Gauge Cluster start to fail. Replacing individual bulbs isn't economical considering the effort to get the cluster out of the car. Replacing all bulbs is the preferred route (except for AT vehicles - which will be explained below).

    Click image for larger version. 

Name:	IMAG3555s.jpg 
Views:	9818 
Size:	97.7 KB 
ID:	14362
    JDM 1997 AT Cluster

    All bulbs can be replaced without disassembling the cluster, except ...

    Updated 17-12-2022 at 02:46 PM by Heineken

    Categories
    Member's Blogs
  5. Gauge Cluster

    Introduction
    The NSX's Gauge Cluster is a good example for a nice and simple design - it features a symmetric layout with one large dial on each side, accompanied by two small dials. These main functionalities are realized:

    • Speed dial (country specific labeling and range)
    • Tachometer (model specific range)
    • Temperature, oil pressure and fuel gauge
    • Shift indicator (AT only)
    • ~30 indicator lights (some model and country specific)


    Variations and Build ...

    Updated 17-12-2022 at 02:44 PM by Heineken

    Categories
    Member's Blogs , Technical Information
Page 1 of 2 12 LastLast