Already at the end of brake OH service so doing another catch up in updating the blog..... After another vacuum leak check, filled the system with Honda Type 2 blue coolant. After initial bleeding, ...
Updated 28-11-2013 at 12:40 PM by Kaz-kzukNA1
Not much to report while putting everything back in place. Very important to follow the specific sequence when tightening the four eng/trans mounts after the TB service regardless of the standard service or my Eng Refresh. If you followed the correct sequence, the rear mount would be the last one to be tightened. ...
Updated 21-09-2013 at 10:50 AM by Kaz-kzukNA1
[Previous two posts, 1 - 14 and 1-15 have been updated with new comment.] Forgot to insert the photo for the vacuum fill of Honda Type 2 coolant. ...
New aluminium gasket at the drain plugs under the floor. Three hoses under the centre floor replaced. One of the most common place for the hose to burst. ...
Time for the vacuum leak check. While waiting, extracted about 300cc of old engine oil from the top and then fresh Mobil 1 went into ...