New crank seal installed and cleaned the area. ...
This is how the liquid gasket should be applied if the cam shaft was removed and ...
No eyesore excessive liquid gasket usage, please. The area should be clean and shiny. New crank seal installed. ...
Removed the heavily melted epoxy potting from the CYL/CRK sensor on the TB cover plate. Took long time getting to this level as you don't ...
Should have taken the 'before' photo but the TB back plate/cover were covered in so much debris and also the melted potting from the CRK/CYL sensor. Spent extra time cleaning them to this ...