Original design WP. It is quite normal to see tiny amount of coolant at the drain hole over many years but this one looked to be already blocked. The bearing was nearly dead with small rattle and making squeaking noise when spinning by hand. ...
Updated 14-10-2013 at 12:34 PM by Kaz-kzukNA1
New gaskets behind the TB back cover plates. Important for TB protection. Before the arrival of the parts from Japan, wanted to finish as much as possible so although it’s going to be duplicated tasks, decided to install the old WP and TB in order to carry out the time consuming marathon 4Hr valve clearance ...
Updated 11-09-2013 at 10:03 AM by Kaz-kzukNA1
Small contamination trapped at the VTEC spool valve filter. It’s the later spec one so the solenoid has smaller diameter (about 25mm) compared ...