As seen on many NSX, the front valve cover was not installed properly during the previous service. Someone tried to paint the outer joint of left drive shaft but gave up after initial attempt?? ...
While I was carrying out the emergency repair service on the Oil cooler for the blue NSX, I started working on the red NSX. The service menu is to carry out Engine Refresh + LMA, refresh the cooling system, A/C CCU, etc. On the way to my place, the owner started to hear loud popping noise from the left door speaker so refurbishing the 3 x Bose speaker AMP were also added to the menu. The owner mentioned that his NSX ...
Updated 31-08-2013 at 02:49 PM by Kaz-kzukNA1
At last, I can carry out the compression check because I didn’t want to start the engine without replacing the rusted through Oil cooler. The full data has been sent to the owner through email. [psi] #1: **5, #2: **6, #3: **5, #4: **3, #5: **5, #6: **7 Really impressed with the very little deviation and I don’t know who carried out the valve clearance adjustment last time but must have ...
Cleaned the boot panel to this level. New cushion disc at both edge of the fixing bolts where the gasket won’t completely cover them. ...
Removed the old glue to this level. Due to water inside the lens as well as several moss started to grow, there were lots of flake like debris sticking to the back of the lens. ...
Updated 29-08-2013 at 12:12 PM by Kaz-kzukNA1