Recently, another person became proud owner of NSX and he contacted me because of the issue with his A/C. Along with our discussion, it became clear that his NSX was JDM and also had its centre console cracked. On JDM NSX, the centre console, ash tray lid, centre blower duct, door switch panels, etc have different finish ...
Cam pulley installed and torqued to the spec. WP installed. Unlike the old one, no need to use the liquid gasket here. ...
New O-ring under the #1 cam holder. About to apply the liquid gasket for cam holder installation. [Edit: Had to delete the reference regarding the bolt colour at ...
Updated 10-11-2012 at 01:48 PM by Kaz-kzukNA1
After more than 2 months, my boss is coming back from Japan tomorrow so wanted to finish as much as possible within today. Started to install the new rubber seals and gaskets on the TB lower/front/rear covers, IG coil cover and valve covers. ...
Updated 10-11-2012 at 12:30 PM by Kaz-kzukNA1
In the process of cleaning the engine. Cleaned the excessive amount of liquid gasket used in the past. I’m now convinced that someone removed the cam holder at least on the front bank and also very likely to be the same for the rear bank. Time to clean the purpose build oil pockets holding the black ...
Recent Comments
