View RSS Feed

All Blog Entries

  1. Bose Speaker AMP Service 02

    by , 28-05-2015 at 10:51 AM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)









    In the process of cleaning my spare Rear AMP board. Removed all of the old hot melting glue and cleaned the surface as much as possible.




    Both AMPs being refurbished and hot
    ...
  2. Bose Speaker AMP Service 01

    by , 27-05-2015 at 12:23 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)








    Wanted to finish refurbishing the Bose AMP for the owner outside of UK by the Bank holiday weekend but unfortunately, with severe damages to one of the circuit board, several delays on NSX servicing and another project with irregular time table for the weekend resulted in limited time working on the boards as well as extra time
    ...
    Categories
    Audio
  3. Bose Speaker AMP Service 01

    by , 01-04-2015 at 12:22 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)







    Quite often, I receive requests and questions from not only the NSX owners but also from Honda dealers, tuning places, etc including the ones outside of UK.
    Nice to be recognised.




    While carrying out the Eng Refresh, being requested to service 3 x Bose AMP from one company.


    ...
    Categories
    Audio
  4. Drive Shaft, Brake OH, etc 02

    by , 02-11-2014 at 04:10 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    In the mean time, I opened the audio head unit and found this.

    Severe acid leakage from the capacitors and some of the tracks were just keeping the continuity with hair line width of remainging track.
    No wonder why there were signal issues such as imbalance between R and L channels.



    ...
  5. Health Check, Cooling Sys, etc 14

    by , 10-10-2014 at 02:04 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)

    On this NSX, both the driver and passenger side door opener cable was set at position #1 rather than the standard setting of #2 which is the middle one.

    One of the reason is that the driver side handle was already broken and someone made quite nice repair ...
Page 4 of 6 FirstFirst ... 23456 LastLast