Another owner sent in his old Main Relay for re-soldering. He bought new one from me several years ago and just wanted to have backup for emergency usage. The mechanical relays inside the old one were from WK23-26 of 1991 so they were the old spec with mechanical spring. The later spec has metal plate spring instead. ...
Started the re-building process. Strengthened the corroded tracks with soldering bridge and used several hard wires to re-create the dissolved patch. The owner sent in the old ...
When this NSX arrived at my place, I struggled to start the engine when the engine/cabin were still hot so replaced the main relay with a new one. As reported earlier, there seemed to be a problem with the Fan ...
Updated 07-11-2013 at 10:16 AM by Kaz-kzukNA1
Lots of parts including the replacement oil cooler related items just arrived. Also, there were parts for the owners who placed the order the other day. Lots of Main Relay..... The Non-DBW type and the DBW one. ...
Updated 18-10-2013 at 01:32 PM by Kaz-kzukNA1
Not much to report while putting everything back in place. Very important to follow the specific sequence when tightening the four eng/trans mounts after the TB service regardless of the standard service or my Eng Refresh. If you followed the correct sequence, the rear mount would be the last one to be tightened. ...
Updated 21-09-2013 at 10:50 AM by Kaz-kzukNA1