Back to the other NSX on the lift at my place…… I already knew the CL master cyl was leaking so decided to replace the CL master/slave/hose as a set. The owner had majority of the parts except for the master cyl, the fixing bolts, etc but then I found the NA1 Type-R CL pedal together with the damper-less joint. There was also ...
Beautiful Koyo Racing Rad installed. No modification required as long as you study the structure of the pipe and how you install the rad fan shroud. ...
Updated 14-07-2015 at 05:45 PM by Kaz-kzukNA1
The usual oil seepage from the Cam black cap. Again, can’t do much without properly removing the camshafts. Looks like the Fuel Filter was replaced in the past but the holder bracket was deformed and the filter body was twisted ...
Already fired up the engine so doing another catch up..... Replaced three coolant hoses under the centre floor. As seen on several NSX, already two of the hoses were very soft and was not surprised if they burst in the near future. Good call to replace them now. Also, three of the pipe end were heavily ...
Before installing the new coolant hoses, replaced the CL Master cyl. Looked as if the CL Hyd line was replaced in the past due to different colour although the shape was so close to the OEM one that it's more likely to be OEM ...