Had to focus on other projects recently so couldn’t spend much time on this NSX but I’m back now. But, first thing first, I wanted to wash my NSX because of the recent snowy weather and so much gritting on the road that it looked like white/grey car than a red one. Once all the salt were washed away from the suspension and under body area, I’m happy for the time being until I repeat the process again next weekend. In order to replace ...
Updated 25-04-2011 at 10:23 PM by Kaz-kzukNA1
Cleaning.JPG Nothing new here and just disassembled the sensor and in the process of cleaning. Lots of unpleasant dust inside .... Adjusted the fan blade shaft holder to get rid of the annoying noise when powered up. CabinTempSensor.JPG AfterCabinTempSensor.JPG ...
Modified the centre arm rest and the thin aluminium plate to accommodate the adapator loom. Nicely installed and tested with no issues. Done.
Updated 03-10-2012 at 11:02 AM by Kaz-kzukNA1
Time to re-install the audio head unit and start the installation of iPod Adaptor USA SPEC PA11-HON. As the Audio head unit was out of the NSX, I could have installed the adaptor loom directly at the back of the head unit. However, I prefer installing it using the CD changer loom/connector behind the left ...
Updated 06-02-2012 at 10:23 AM by Kaz-kzukNA1 (New image file link)
Depending on the state of your audio head unit, you may need to reinforce your ACC line at the CD changer port before installing the iPod adaptor. In fact, to be on the safe side, I’ll probably make these two items (replacing CAPs and reinforcing the ACC line) as a ‘MUST’ service before installing the iPod adaptor at my place. ...
Updated 06-02-2012 at 10:41 AM by Kaz-kzukNA1 (New link to image file)
Recent Comments
