Cleaning.JPG Nothing new here and just disassembled the sensor and in the process of cleaning. Lots of unpleasant dust inside .... Adjusted the fan blade shaft holder to get rid of the annoying noise when powered up. CabinTempSensor.JPG AfterCabinTempSensor.JPG ...
Modified the centre arm rest and the thin aluminium plate to accommodate the adapator loom. Nicely installed and tested with no issues. Done.
Updated 03-10-2012 at 11:02 AM by Kaz-kzukNA1
Time to re-install the audio head unit and start the installation of iPod Adaptor USA SPEC PA11-HON. As the Audio head unit was out of the NSX, I could have installed the adaptor loom directly at the back of the head unit. However, I prefer installing it using the CD changer loom/connector behind the left ...
Updated 06-02-2012 at 10:23 AM by Kaz-kzukNA1 (New image file link)
Depending on the state of your audio head unit, you may need to reinforce your ACC line at the CD changer port before installing the iPod adaptor. In fact, to be on the safe side, I’ll probably make these two items (replacing CAPs and reinforcing the ACC line) as a ‘MUST’ service before installing the iPod adaptor at my place. ...
Updated 06-02-2012 at 10:41 AM by Kaz-kzukNA1 (New link to image file)
Other CAPs (capacitors) were also leaking the acid and damaged the circuit tracks. ...
Updated 06-02-2012 at 10:48 AM by Kaz-kzukNA1 (New link to image file)
Recent Comments
Blog Categories
Archive
