...
Updated 22-11-2017 at 12:55 PM by Kaz-kzukNA1 (back dated to reflect the actual date.)
Didn't like the level of corrosion at the brake banjo bolt so replaced both RR & RL ones. Bleeder screws were fine at all four corners so just re-used them. As we are not replacing the Brake master cyl, ...
Updated 21-02-2015 at 08:23 PM by Kaz-kzukNA1
Carried out the test driving session. It was fairly cool so not too bad when driving with CCU setup at 32degC. Will adjust the coolant level tomorrow morning. Exercised the ABS several times until the ABS pump was activated in order to pressurise the accumulator to the spec and to adjust the fluid level afterwards. Brake back to how it should be. Although it is ...
Updated 24-09-2012 at 10:09 AM by Kaz-kzukNA1 (Revised blog category.)