...
The owner replaced the header tank a while ago and asked me to re-use it so just the new cap, overflow tube with clip added. Now the CL hose connected to the slave cyl. ...
As reported earlier, the A/C condenser fans and compressor switched themselves On despite the CCU being switched off. It is still possible that the Cooling fan control unit is faulty but decided to open ...
Updated 10-10-2013 at 11:34 AM by Kaz-kzukNA1
Not much to report while putting everything back in place. Very important to follow the specific sequence when tightening the four eng/trans mounts after the TB service regardless of the standard service or my Eng Refresh. If you followed the correct sequence, the rear mount would be the last one to be tightened. ...
Updated 21-09-2013 at 10:50 AM by Kaz-kzukNA1
Old design front and rear TB covers. Will be interesting to see how far the cam pulleys chewed into them. I have latest design spare covers so if they looked to be going to make scratching noise in ...