For the installation of the BC coilover kit, had to remove the rubber seal under the bonnet. As expected, the clips were all dead. Replaced all of them. ...
Updated 08-08-2013 at 09:34 PM by Kaz-kzukNA1
As I have been so busy for more than 7 weeks now, doing bit of catch up with updating this Blog. The iPod adaptor USA Spec PA11-HON. It’s the latest model that has the dongle like part on the cable going to the Apple device. USA Spec released new Bluetooth version a while ...
Updated 21-09-2012 at 01:14 PM by Kaz-kzukNA1
While carrying out Eng Refresh Stage 1 + LMA service and cooling/brake system overhaul, I was working on another NSX. As reported earlier here, the ACC line for the CD changer port was seriously damaged inside the audio head unit. As I didn’t like the fact that the track was already ...
Modified the centre arm rest and the thin aluminium plate to accommodate the adapator loom. Nicely installed and tested with no issues. Done.
Updated 03-10-2012 at 11:02 AM by Kaz-kzukNA1
Time to re-install the audio head unit and start the installation of iPod Adaptor USA SPEC PA11-HON. As the Audio head unit was out of the NSX, I could have installed the adaptor loom directly at the back of the head unit. However, I prefer installing it using the CD changer loom/connector behind the left ...
Updated 06-02-2012 at 10:23 AM by Kaz-kzukNA1 (New image file link)
Recent Comments
Blog Categories
Archive
