Recent Blogs Posts

...

Tags: pressure bleed, pressure bleeding, vacuum feed, vacuum fill, vacuum leak check

Categories

Cooling , Brake

...

Tags: abs, abs t-wrench, pressure bleed, pressure bleeding, solenoid flushing, spare tyre, tail light assy, tail light assy alignment

Categories

Engine/Tyre , Brake , ABS Original , Body

Nothing special and just usual vacuum leak check of the cooling system followed by the vacuum feed of Honda Type 2 coolant.

As we are not going to replace the coolant hoses this time, some old Type 2 coolant was left in the system. Therefore, I recommend the owner to replace the coolant again in 2 years time to be on the safe side. Normally, you can go for 4 ...

Tags: honda type 2 coolant, oil filter, pressure bleed, pressure bleeding, type 2 coolant, vaccum leak check, vacuum feed, vacuum fill

Categories

Health Check Service , Engine/Tyre , Cooling , Brake

Pressure bleeding the brake fluid.
As the owner must replace the rear brake pad, decided to set the fluid level like this on purposely as someone must wind back the rear piston in order to install the new pads and I don’t want to see ...

Tags: abs, compression check, ig coil, oil filter, pressure bleed, spark plug

Categories

Health Check Service , Brake , ABS Original

Modified the ABS Upgrade Loom from T3Tec in preparation for the installation.

Anyone who asked me to carry out the ABS upgrade or bought the ABS upgrade loom through me will receive the English version of installation manual that I created.
It’s my property so hope no one will distribute it ...

Tags: abs upgrade loom, pressure bleed, pressure bleeding

Categories

ABS Upgrade