...
Updated 21-05-2021 at 03:22 PM by Kaz-kzukNA1
Have been tackling the door window alignment for many days recently with one nearly dead finger as a result. It looks like someone already mistreated some of the parts that I planned reusing and at the end, I had to make custom adjustments that were not on the workshop manual. ...
Hm…. It’s dirty but you don’t want to apply any force in this area especially around the linkage and the plastic fasteners. Removing the rod from the linkage is easy if you know the trick but it’s time consuming ...
European spec high pressure washer motor, grommet, seal sponge. The old motor was still active but lost pressure so already partially dead. Washer tube held with new bracket. ...
I’m not going to bother repairing this protective sheet again…. Will clean the old OEM white sticky sealant and replace the sheet. However, later, I found that addition to the black butyl sealant, someone used double sided tape under there. It was a nightmare removing them ...
Recent Comments
Blog Categories
Archive
