View RSS Feed

Recent Blogs Posts

  1. Brake OH, Cooling Sys, etc 04

    by , 23-09-2016 at 01:12 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)









    ...

    Updated 23-09-2016 at 02:10 PM by Kaz-kzukNA1 (inserted 'AT' to be clear on the header/exh torque curve section)

    Categories
    Health Check Service
  2. Eng Refresh + LMA, Bilstein Damper, etc 04

    by , 21-03-2015 at 01:16 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)

    Part of the exh pipe hitting the back box. Eventually, it will make small hole.




    Another example of extra rust at the right side
    ...
  3. Eng Refresh 03

    by , 10-04-2014 at 12:14 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    The parking brake cable was stuck inside the L-shaped bracket on the
    brake caliper.
    And the two bolts holding this bracket were heavily corroded so
    I had to be really careful not to sear them off.

    I’ll replace them with the new one on installation.
    If I have the time, will try separating the cable from the bracket
    ...

    Updated 14-04-2014 at 10:53 AM by Kaz-kzukNA1 (Added parking brake cable photo.)

    Categories
    Eng Refresh Stage 1 + LMA