...
Didn't like the level of corrosion at the brake banjo bolt so replaced both RR & RL ones. Bleeder screws were fine at all four corners so just re-used them. As we are not replacing the Brake master cyl, ...
Updated 21-02-2015 at 08:23 PM by Kaz-kzukNA1
For now, I'm going to return this NSX temporarily to the owner so that he can take it to other place with commercial vehicle class tool that should be able to press out the seized drive shaft spindle. I was trying to find some photos from my archive but couldn't find suitable one so will forward the ones that I found on the web to the owner on recommended method. Disappointed but at the same time, ...