...
Couldn't use the blog setting control for some reason so hope the following will be displayed properly...... Was not in the menu but I just didn't like the feeling of the brake performance and the pedal feedback. Also, the disc and the pad were not making good contact. So, started the brake overhaul. Based on the feedback from ...
As reported earlier, I didn’t like the twisted brake lines at the FR and FL brake callipers so removed the fitting and re-installed them properly. When I removed the brake line at the FL side, I noticed that it had wear marking ...
The FR brake pipe fitting was overtightened and heavily corroded. Looking at the angle of the pipe, there is a chance that it was somewhat forced/cross threaded during the installation of the aftermarket brake line. I just hope I can get it loosened without damaging the fitting. Time for the acetone/ATF ...
Recent Comments
Blog Categories
Archive
