In order to be as close as possible with the OEM rideheight, I'll set the C-ring at the upper perch. Using the lower perch will lower the rideheight about 25mm depending on the lever ratio. Because of using the new rubber parts, we can't carry out the alignment service immediately until the damper/spring ...
Not much to report while the car is going up and down on the lift to have its ride height adjusted and then moving back and forth the short distance with hard braking to rock the chassis. I haven’t carried out the test driving session yet but already feeling the huge difference by braking hard and also even when the car is lowered to the ground from the lift. ...