...
Updated 08-12-2019 at 03:26 PM by Kaz-kzukNA1
Updated 23-09-2016 at 02:10 PM by Kaz-kzukNA1 (inserted 'AT' to be clear on the header/exh torque curve section)
On this NSX, both the driver and passenger side door opener cable was set at position #1 rather than the standard setting of #2 which is the middle one. One of the reason is that the driver side handle was already broken and someone made quite nice repair ...
Already in the process of removing the brake caliper and coolant hoses so doing bit of catch up updating the blog. For some reason, someone trimmed part of the door handle at both R & L sides. ...
Based on the weather forecast, decided to wash the car first before looking into the driver side door handle/lever. First, reset the ECU and carry out the test driving session including the 70mph cruising mode for about 30min. No CEL and happy with the result. After carrying out the Engine Refresh on this engine a while ago, it sounds so smooth and quiet. I replaced the LMA as well at that time so that made huge ...