Recent Blogs Posts

New gasket for the VVIS chamber and butterfly mechanism.




Must replace all ten washers.



...

Tags: egr pipe, gasket, intake manifold, tb adjuster bolt seal, tb lower cover, th body, vvis, vvis gasket

Categories

Eng Refresh Stage 1 + LMA

Installed new gaskets and seals on the painted valve cover.
The inside of the cover is very clean after being washed.

...

Updated 01-06-2012 at 11:06 PM by Kaz-kzukNA1

Tags: gasket, valve cover

Categories

Engine Refresh Stage 2

So, something looked like this is now cleaned to this level and valve cover gaskets as well as the spark plug seals are replaced with the new ones.

Installed the new gasket on the new TB Lower cover.
And one of the most important gaskets replaced on the IGN coil covers.

...

Tags: gasket, valve cover

Categories

TB/WP/Valve Service , Engine/Tyre

Before going any further, wanted to carry out the vacuum leak check of the cooling system especially after replacing the WP as well as all of the coolant hoses.


You don’t want to find any leakage at the WP after re-assembling everything as you will need to remove almost everything again to get to the WP.

Installed the header tank and oil cooler hoses in ...

Tags: gasket, vacuum leak check

Categories

TB/WP/Valve Service , Engine/Tyre , Cooling