In the process of servicing the VTEC Spool valve. As reported earlier, rear one ...
Another place with high oil pressure that can cause oil seepage. The oil press sender unit. Replaced the o-ring and should be fine for many years. As reported earlier, the IG coil harness holder ...
The black oil contaminated the VTEC Spool valves as well. Took some time cleaning the inside but now they are both back in place with new filters and bolts. ...
Once the Eng is out, first thing is to check the state of the engine. Further investigation revealed that the oil leakage was even more severe than originally thought. With the state of nearby coolant hoses, etc, already agreed with the owner to replace all of the nearby coolant hoses, cramps, etc. ...
[Edit:] Message to the owner Forgot to mention this in the previous post. Despite having the later spec LMA, to my finger, the one at the Inlet side of the #4 cyl felt tiny bit weaker than others. It is possible that it's just my imagination as I didn't measure the spring rate and just felt with my finger. Nothing to concern and won't cause noise issue probably even after the next TB service. It's the same on any ...
Updated 06-03-2014 at 03:46 PM by Kaz-kzukNA1
Recent Comments
Blog Categories
Archive
