...
In the process of servicing the VTEC Spool valve. As reported earlier, rear one ...
In the process of clearance adjustment. 24 adjustments were checked twice for the clearance and the torque. ...
Despite the poor status of cooling system, the mechanical engine parts were in very clean condition. All LMA felt soft but they will be replaced any way. Slight heavy marking on #3 intake side cam lobe but nothing major. Looked to be something (black liquid gasket??) was trapped in the past ...
VTEC Spool valve service. It can be done at any time without opening the engine but its a MUST item due to the process for replacing the LMA. This NSX is using the smaller ...
Updated 15-05-2013 at 10:52 AM by Kaz-kzukNA1