Recent Blogs Posts

Just finished the 49th day ceremony over the weekend back in Japan.
Now we can bury the ashes in the grave.
Lived too long outside of Japan and for us, it was first time experience so everyday leant something new since July.
R.I.P.



Now back to Eng Refresh.






...

Updated 02-09-2019 at 10:04 AM by Kaz-kzukNA1

Tags: crank pulley, exh gasket, vtec, vtec solenoid, vtec spool valve

Categories

Eng Refresh Stage 1 + LMA

Everything back in place, pressure bled the brake system,
staked the spindle nut and kept the car on the ...

Tags: brake disc, disc, drive shaft, front lip spoiler, front spoiler, pad, pad material, pressure bleed, rear upper trim, spindle nut, vtec

Categories

Eng Refresh Stage 1 + LMA , Driveshaft , Brake , Personal View/Self Talk

The VTEC spool valve installed with 2 new gaskets and 6 new bolts at each bank.
Later spec smaller diameter solenoid model so P08 version used.



...

Updated 15-01-2014 at 12:16 PM by Kaz-kzukNA1

Tags: oil press sender, oil pressure sender unit, timing belt, valve clearance, vtec, vtec spool valve

Categories

Eng Refresh Stage 1 + LMA

Long hours marathon session of valve clearance adjustment started.

The clearance and the torque checked twice for each cyl and
as my standard procedure, they were checked one more time to bring
all 24 adjustments ...

Updated 27-10-2013 at 12:27 PM by Kaz-kzukNA1

Tags: oil press sender, oil pressure sender, valve clearance, vtec, vtec spool valve

Categories

Eng Refresh Stage 1 + LMA

Installed the passenger foot well and door speaker boxes.
Be gentle will all of the fixing tabs at the speaker box as well as at the door card.




Whenever you have a chance to access the 3pin connector behind ...

Tags: abs, bose, bose amp, bose speaker amp, test driving, vtec, vvis

Categories

Eng Refresh Stage 1 + LMA , ABS Original , Audio