...
CCU back in place and carried out Self diag as well as Function & Operation check. Really annoying noise from the aspirator fan at the cabin temperature sensor but didn’t want to deal with it after what I saw behind the aftermarket ICE head unit…. ...
After cleaning the inside of valve cover, always replace the valve cover gasket, dust seal and IG coil hole seal as a set. If you order the proper kit, it also contains the metal/rubber disc washers that must be replaced every time when the fixing nuts were removed. ...
Updated 19-09-2013 at 11:18 AM by Kaz-kzukNA1
Valve clearance at the front bank adjusted and checked twice. Then, checked the clearance and locking torque one more time on all six cyl. Finally, the long hours marathon task of valve clearance adjustment has completed. ...
So, all four wheels back on the car and adjusted the tyre pressure. As the garage was warm and it looks like it is going to be cooler during the week, decided to set it to the OEM 40/33psi pressure setting. And when I thought I was ready to go out for the test driving session, ...
Updated 24-09-2012 at 10:08 AM by Kaz-kzukNA1 (Revised blog category.)