...
Updated 08-11-2018 at 02:26 PM by Kaz-kzukNA1
Following on from yesterday, still working on the two solenoids that were completely stuck closed. After lots and lots of attempts, finally both of them started to release the fluid back into the reservoir. Before this, flushed the accumulator twice as my standard procesure. It was ...
Updated 23-11-2012 at 02:22 PM by Kaz-kzukNA1
As soon as I started the service, I knew there was something wrong with the system. I had to close the bleeder four times before I could release the high pressure fluid from the accumulator because there was excessive air in the system. While I was pressurising the system in order to flush the accumulator, already there was some fluid coming out of the return port. This ...
Updated 03-10-2012 at 10:56 AM by Kaz-kzukNA1