The tail light assy was full of moisture and it was caused by the condensation inside the boot. ...
Started to work on another NSX from last week. The service menu is to carry out the Eng Refresh, Health Check, Cooling Sys OH, etc. As I have never serviced this NSX, started with the Health Check or I should say I already spotted big issue on arrival. When the owner arrived at my place (eng still hot), the coolant level was already below MIN. ...
Once again, another owner wanted to upgrade his classic ABS to the latest one body solution introduced from 99/00 models (definition of year model depends on the country spec) so placed the order for the KSP Engineering ABS upgrade loom. Normally, ...
Updated 20-11-2014 at 11:17 PM by Kaz-kzukNA1 (added title number)
Managed to drill out one of the bolt holding the brake line bracket at the original position. Looking at the surface of the other bolt, I didn't have enough confidence in driving the drill square through the remaining bolt body so decided to leave it as it is. Not a problem as at the other side of the hub carrier, I re-installed the rubber protector around the brake line ...
Once again, checking the piston movement. By the way, just collected the proper OEM spec connector for the aftermarket ...