Finally, happy with the cyl head cleaning. ...
Updated 06-12-2014 at 02:16 PM by Kaz-kzukNA1 (typo and probably still there)
Mixed feeling about the engine oil maintenance...... At one point, I think this NSX was used for frequent short distance journey and possibly the engine oil was not replaced regularly. The build up of gunk from the blowby was serious behind the valve covers. I'll need to soak it in the cleaning solution ...
3rd round of valve clearance adjustment done. Finally, the engine is ready to be closed. ...
After leaving the head bolts over night, carried out the final torque check and as expected, a few of them moved just a few deg. While installing both heads, I was in the middle of cleaning the ...
[Edit:] Message to the owner Forgot to mention this in the previous post. Despite having the later spec LMA, to my finger, the one at the Inlet side of the #4 cyl felt tiny bit weaker than others. It is possible that it's just my imagination as I didn't measure the spring rate and just felt with my finger. Nothing to concern and won't cause noise issue probably even after the next TB service. It's the same on any ...
Updated 06-03-2014 at 03:46 PM by Kaz-kzukNA1